Separation point: 33,33mm with 6 SMD each | Pitch (light point center-center): 5,56mm | 1 unit (roll) = 5m | max. flex stripe length per infeed: 5m | length tolerance + thermal expansion: 1% | required cooling mass min. 75 gr/m | incl. 3M 300LSE adhesive tape | Clean and degrease surface before application! Do not remove again! | Special feature: connection cable on both sides
Nominal voltage
24 V DC
Rated power
12 W/m
Active power
11 W/m
RGB light source
Yes
CRI Ra
85
Beam angle
120°
Pitch SMD (mm)
5.56
Max. length per feed (m)
5,0
Type de ruban adhésif
3M 300LSE
Protection class
IP20
Permissible ambient temp.
0°C - 40°C
Length in mm
5000,0
Width in mm
10,0
Height in mm
1,0
Lifetime L70|B10
53000
Guarantee in years
2
Excess lengths
N
You will be redirected to another language according to your geo-location