Separation point: 50mm with 8 SMD each | Pitch (light point center-center): 6mm | 1 unit (roll) = 5m | max. flex stripe length per infeed: 5m | length tolerance + thermal expansion: 1% | required cooling mass min. 75 gr/m | incl. 3M 300LSE adhesive tape | Clean and degrease surface before application! Do not remove again! | Silicone encapsulation | Special feature: connection cable on one side
Nominal voltage
24 V DC
Rated power
14,4 W/m
Active power
12,5 W/m
Luminous flux in lumen
1250 lm/m
RGB light source
No
Color temperature
1939K
CRI Ra
82
Cooling mass g/m
75.00 g/m
Beam angle
120°
Pitch SMD (mm)
6.00
Max. length per feed (m)
5,0
Type de ruban adhésif
3M 300LSE
Protection class
IP20
Outdoor
Y
Permissible ambient temp.
-20°C - 45°C
Housing material
Copper
Length in mm
5000,0
Width in mm
10,0
Height in mm
1,0
Lifetime L70|B10
38000
Guarantee in years
2
Excess lengths
N
You will be redirected to another language according to your geo-location